Posted by Gabriel Brangers on Nov 15th 2026
HOW BURGLARS ACTUALLY ATTACK A GUN SAFE
Nobody picks the lock on a gun safe. Rarely does someone drill it, nobody cracks it with a stethoscope, and nobody drops a slab of concrete on it. What actually happens is that somebody puts a flat bar in the gap at the edge of the door and leans on it, and a few minutes later the door is open with every locking bolt still sticking out of it.
We build safes for a living, which means we spend a lot of time reading spec sheets written to impress people who have never watched a safe get attacked. So we went the other direction. We bought our competitors' safes, put them on the floor of our shop in Caldwell, Idaho, and attacked them the way they actually get attacked. This is what we learned, and what it should change about how you shop.
The Short Version
The real attack on a residential safe is prying, and the target is the seam where the door meets the body. The tool is whatever was handy, usually a flat pry bar, a long screwdriver, or a framing hammer. The attacker is not a safe technician. In most cases he is not even a planner.
That is the whole threat model, and almost nothing on a gun safe spec sheet speaks to it. Bolt counts do not, because bolts are not what fails. Steel gauge only partly does. The thing that decides whether your door stays shut is how the door and the body of the safe are connected to each other when somebody tries to spread them apart.
The one sentence version. A burglar does not defeat a lock, he defeats a gap, and the safe you want is the one that has the least to offer him when he puts a bar into it.
Who Is Actually Coming Through The Door
It is worth being clear about who we are designing against, because the picture in most people's heads comes from movies.
The best data we have on this comes from asking burglars. In a study funded by the Alarm Industry Research and Educational Foundation, researchers at the University of North Carolina at Charlotte surveyed 422 incarcerated burglars drawn at random from state prisons in North Carolina, Kentucky and Ohio. The findings in Understanding Decisions to Burglarize from the Offender's Perspective are not what the spec sheets assume:
- About 12 percent typically planned the burglary ahead of time. Forty one percent said it was usually a spur of the moment decision.
- Most got in through an open or forced door or window. Only about one in eight picked a lock or used a key they had gotten hold of beforehand, and that figure includes the keys.
- Half of those who ran into an alarm said they would quit on the spot, and another 31 percent said they would sometimes back off.
- The leading motives were drugs and money, named by 51 and 37 percent.
Read that list again with a safe in mind. The person standing in front of your safe got into the house by force or by luck, did not plan the trip, is in a hurry, is probably in withdrawal, and has never opened a safe before. He is not going to pick your lock. He is going to look at your safe, find the weakest looking edge of it, and go to work with whatever is in your garage.
The stakes are not theoretical. The Bureau of Justice Statistics put it in numbers in Firearms Stolen during Household Burglaries and Other Property Crimes: about 1.4 million firearms were stolen in burglaries and other property crimes between 2005 and 2010, an annual average of 232,400, roughly 172,000 of them in household burglaries. At least 80 percent of them had not been recovered. Those guns did not vanish. They went into the hands of people who should not have them, and a meaningful share of them came out of a box somebody believed was a safe.
The Attacks That Actually Happen
Here they are in the order we see them, most common first.
1. Prying the door seam
This is the main event and everything else is a footnote. The bar goes into the gap at the edge of the door, usually near a corner or right next to the handle, and the attacker uses the body of the safe as his fulcrum. He is not trying to break anything. He is trying to move the door frame far enough that the bolts no longer have anything to hold on to. On a lot of safes that takes one bite. On the worst of them it takes less time than it took you to read this section.
2. Peeling a corner
A variation on the same idea. Thin body steel will deform before anything else gives, so a corner gets hammered or chiseled until it opens a lip, the lip takes the bar, and now the attacker has a handhold that keeps getting bigger. He does not need to open the door all the way. He needs a hole big enough to reach a hand or a hook through, and the contents come out one at a time.
3. Hitting the lock rather than picking it
Dials get knocked off with a hammer and the spindle gets punched, not because it is clever but because it is fast and it sometimes works. Electronic locks get hit too. We found something during our own testing that I did not expect: several of the safes we tested never needed the pry bar at all, because the models fitted with key overrides or solenoid locks came open from being rocked and bounced. The lock was the cheapest part of the door, and it was also the way in.
4. Taking the whole safe
If a safe is not bolted down, the door never has to be defeated in your house. Two people and an appliance dolly can take a four hundred pound safe out of a garage, and it gets opened at their leisure somewhere else, with better tools and no clock running. An unanchored safe also pries more easily, because it rocks and gives the bar room to work. Anchoring is the cheapest security upgrade in this entire article, and we wrote up the practical side of it in how to move a gun safe.
5. Power tools, once in a while
Cordless angle grinders are cheap now and they do turn up, usually in a burglary where somebody already knew the safe was there. Granted, this is the one attack where a thicker body genuinely buys you time. It is still rare compared to prying, because a grinder is loud, it throws sparks across somebody else's house, and it takes a battery and patience that most of these people do not bring with them.
What Almost Never Happens
This industry loves a demonstration video, mine included, so it is worth separating the ones that describe a burglary from the ones that describe a stunt.
Lock picking and safe cracking, in the sense anybody means it on television, essentially does not occur in residential burglary. Neither does drilling, which requires knowing where to drill. Cutting torches do not show up in houses. Neither do explosives. Rifle fire, forklifts, trucks with chains, safes pushed off roofs and thousand pound blocks of concrete dropped from cranes are entertaining, and I have watched my share of them. None of them is an attack. A burglar has never once hoisted a cement block over a safe in somebody's bedroom.
How to watch a torture test. Ask one question of any demo video, ours included: is this the attack that happens, with the tool that gets used, on a clock that resembles a burglary? If the answer is no, you are watching an advertisement. That does not make it dishonest. It just means it tells you nothing about the only ten minutes that will ever matter.
Why Bolt Count Does Not Stop A Pry Bar
Walk into any store that sells safes and you will be told how many locking bolts a door has, how big around they are, and sometimes what they are chromed with. Twelve bolts, sixteen bolts, twenty. It is the number the whole category competes on.
Here is the problem. On a conventional safe, whether it uses flat military style bars or round bolts, those bolts live in the door and slide out behind the door frame. They overlap the frame. They are not attached to it. The entire arrangement depends on that frame staying exactly where the factory put it.
So the attacker does not fight the bolts. He bends the frame. Lever the body away from the door and the frame travels out of the way, the bolts slide right past where it used to be, and the door opens with all twenty of them still fully extended and undamaged. Nothing broke. The parts simply stopped overlapping. I've have watched that happen in our own shop more more times than you'd probably care to know, and the bolts are always still sitting there, perfect, as the door swings open.
That said, bolts are not useless. They are what holds a door shut against a person pulling on a handle, and every safe needs them. They are just not the answer to the question people think they are asking when they count them.
So We Pried Them Open Ourselves
Claims like the one I just made are easy to type, so we filmed the alternative. We bought nine safes from eight brands, set them up in Caldwell, and attacked all of them the same way: the same tool, the same clock, no exceptions and no second attempts. Then we did it to one of our own.
The SafeX pry test. The other nine runs are on our break-in tests page.
Every one of the nine opened. Here is how long each door lasted, shortest first:
| Safe tested | Door open in |
|---|---|
| Sports Afield | 16 seconds |
| Cannon | 19 seconds |
| Pro Steel | 21 seconds |
| Winchester | 22 seconds |
| SureLock | 27 seconds |
| Stack-On | 34 seconds |
| Yuma | 1 minute 41 seconds |
| Liberty Centurion | 1 minute 48 seconds |
| Liberty Colonial | 6 minutes 30 seconds |
Credit where it is owed, because this is a comparison and not a grudge: the two longest holds on that list are Liberty models, and the Colonial took more than six minutes of work. That is a real result and I will say so. Six of the nine lasted less than thirty five seconds.
Then there is the tenth run, the one in the video above. We put the same bar into one of ours and worked it for more than ten minutes, and the door never opened. We have gone longer in other testing and SafeX® but 10+ minutes is how long we attacked this model before we settled for defeat.
Every one of those nine safes uses bolts that slide behind the door frame. Pry the body away and the frame moves out of the way with it. That is not nine separate design mistakes. It is one design, repeated across the category, meeting the attack it was never built for. You can watch all ten runs on the break-in tests page and judge the footage yourself.
What Held, And Why
Our answer to this is a patented locking system called SafeX®, and it exists for one reason: we stopped trying to win the bolt count and went after the geometry instead.
SafeX® reverses which part holds which. The anchor studs are not on the door. They are steel posts with wide heads built into the safe's own door frame, and when the door closes those posts pass into it. Turning the handle slides a thick steel locking plate across the inside of the door, in behind the head of every stud. The door and the body are hooked into each other rather than merely overlapping.
The result is that prying works against itself. Levering the body away from the door no longer separates the two, because the locking plate is caught behind the stud heads. The harder the bar pulls, the harder the plate grabs. The gap at the door edge, the thing the whole attack depends on, never opens up.
A side effect we did not plan on. SafeX® uses external hinges, which means the fire lining runs uninterrupted all the way around the door frame instead of being broken where an internal hinge body sits. The design that resists a pry bar also closes a hot spot. We get asked which one it was built for, and the honest answer is prying, with the fire benefit falling out of it.
SafeX® is standard on every safe we sell, across all series, including the Bighorn, Kodiak and Longhorn lines . Every one of our gun safes, home safes and vault doors ships with it. It is not an upgrade, an option, or a feature held back for the expensive models. I am not going to pretend that is generosity. It is that we do not want to sell a door that opens the way the ones in that table did.
How To Shop For Pry Resistance
Take this list to any dealer, including mine, and ask the questions out loud. A salesperson who cannot answer them is selling you a spec sheet.
- Ask how the door locks into the body, not how many bolts it has. You want to know what the bolts or studs are holding on to, and what happens to that connection when the frame is forced. If the answer is that the bolts slide behind the frame, you now know exactly how that safe opens.
- Put your eye on the gap at the edge of the door. A wide, uneven seam is an invitation, because the bar needs somewhere to start. Run a finger down it on the handle side and the hinge side both.
- Ask whether anybody has pried one, and whether you can watch. Not a drop test, not a drag test. A pry test. If a manufacturer has never published one, ask yourself why, because every one of us knows this is how safes get opened.
- Ask what the lock does when the safe gets hit. A key override or a solenoid that can be bounced open is a second door, and it is usually the cheapest part on the safe. This is the question nobody asks and it cost several of the safes in our test their entire defense.
- Compare the door steel to the body steel. A thin door on a thick body is a pry problem before it is anything else. Most of our safes carry the same gauge on the door as the body, and the Thunderbolt series goes further with a 10 gauge door over a 7 gauge core.
- Confirm it can be anchored, then anchor it. Ask where the anchor holes are and what hardware comes with it. A safe that cannot be bolted down is a safe that leaves in a pickup.
- Read the warranty for the word burglary. Plenty of warranties cover manufacturing defects and go quiet about attacks. Ours is a limited lifetime warranty that covers repair or replacement after a burglary or a fire, which is the only circumstance in which anybody actually needs it.
Five Things That Help Any Safe, Including Somebody Else's
If you already own a safe and you are not replacing it this year, these are worth doing this weekend. None of them requires buying anything from me.
- Bolt it to the slab. This is the one. An anchored safe cannot be rocked, cannot be tipped onto its back where the door is easiest to work, and cannot be wheeled out to a truck.
- Take away the room to swing. Prying needs leverage, and leverage needs space. A safe set into a corner or a closet, hinge side tight to a wall, gives a bar far less to work with than one standing proud in the middle of a garage with a straight run to the door.
- Stop advertising it. The carton on the curb on trash day tells the whole street what arrived and roughly what it cost. So do photos of the open door on social media. Most of these burglaries are opportunistic, which means the information is what creates the opportunity.
- Put an alarm and a light on it. In the Charlotte survey, half the burglars who encountered an alarm said they would quit immediately and another 31 percent said they sometimes would. A safe buys minutes, and an alarm is what makes those minutes expensive.
- Write down the serial numbers. Four out of five stolen guns are never recovered, and a gun with no documented serial number is nearly impossible to return to you even when it does surface. We laid out a system for this in documenting your collection.
So, how do burglars actually attack a gun safe? With a bar, at the seam, in a hurry, with tools they did not bring. Everything that matters about a safe's security happens in that gap at the edge of the door. Fire ratings, bolt counts, paint, carpet, lighting and interiors are all real features that we sell happily, and not one of them is in the room when somebody leans on a pry bar. That is the test worth passing, which is why it is the one we film. If you want to see the rest of what a safe is being asked to survive, we covered the fire side in are gun safes fireproof and the price side in gun safe versus gun cabinet.
Common Questions About Gun Safe Break-Ins
Can a gun safe be pried open?
Yes, and prying is the most common way gun safes are actually defeated. The attacker puts a flat bar into the gap at the edge of the door and levers the body away from the door until the frame moves far enough that the locking bolts no longer have anything to hold on to. In our own comparative testing, nine safes from eight brands all opened this way, six of them in under thirty five seconds. The tenth safe we tested was one of ours, fitted with our SafeX® anti-pry system, and fifteen minutes of the same attack did not open it.
How do burglars open gun safes?
Almost always by prying the door seam with a hand tool, by peeling a corner of thin body steel until it gives them a handhold, by striking the lock, or by taking the entire safe away with them because it was not bolted down. Lock picking, drilling, cutting torches and power tools are rare by comparison.
Do more locking bolts make a gun safe more secure?
Not against prying. On a conventional safe the bolts slide out of the door and behind the door frame, so they depend on that frame staying in place. Bend the frame and the bolts slide right past where it used to be, and the door opens with every bolt still extended and undamaged. What matters is how the door and the body are connected, not how many bolts are counted on the spec sheet.
Can burglars pick a gun safe lock?
Essentially never. In a survey of 422 incarcerated burglars conducted by researchers at the University of North Carolina at Charlotte, only about one in eight reported picking a lock or using a previously acquired key to enter a home at all. Residential burglars attack a safe with force, not with skill, and a lock is more likely to be struck with a hammer than picked.
Does bolting down a gun safe actually help?
Yes, and it is the cheapest security improvement available to you. An anchored safe cannot be rocked to create the movement a pry bar needs, cannot be tipped onto its back, and cannot be wheeled out of the house to be opened somewhere else at the attacker's convenience.
What is the SafeX Security System?
SafeX® is Rhino Metals' patented anti-pry locking system. Anchor studs with wide heads are built into the safe's door frame, and a thick steel locking plate inside the door slides in behind those heads when you turn the handle, hooking the door and the body together. Prying the body away pulls the two harder against the locking plate instead of pulling them apart. It is standard on every safe we sell.
Watch The One That Held
Ten safes, one pry bar. Nine opened. Ours took fifteen minutes of the same attack and never did. SafeX® is standard on every Rhino gun safe, home safe and vault door, with no upcharge and no upgrade package.
Shop Gun Safes Watch The Break-In TestsTimes shown are from Rhino Metals' own comparative pry testing of competitor safes and of our own, filmed in Caldwell, Idaho, and reflect the specific models tested on the dates filmed rather than any manufacturer's current production. Brand names are the property of their respective owners and are used here to identify the models tested. SafeX® is a registered trademark of Rhino Metals, Inc. This article is general information about how residential safes are attacked and is not a guarantee of performance in any particular burglary.